Servo Drive DC

SDRC

230Vac 单向模拟转换器。该转换器设计用于驱动从0.22到1.7 kW的直流电机,适用于各种应用;其特点是体积小和高可靠性。

BLDC

用于直流伺服电机的四象限驱动器。该驱动器设计用于以模拟模式驱动从0.4到1.3 kW的电机,电压最高可达130Vdc。

Caratteristiche

SDRC

  • 单相 230Vac 电源
  • 规格 5 A 或 10 A
  • 标准电枢反馈或测速发电机
  • 输出电压 170Vdc
  • IP00

BLDC

  • 电源范围从 31 到 132 Vdc
  • 无刷电机或直流电机的运行设置
  • 模拟速度控制
  • 模拟扭矩控制
  • 反馈:编码器、测速发电机、电枢

SDRC

Scarica pdf

Characteristics9XSDRC05IG9XSDRC10IG
Power Supply230 Vac ±10%230 Vac ±10%
Output Voltage170Vdc170Vdc
Regulation Ratiowith tachogenerator1:301:30
armature1:101:10
Speed Errorwith tachogenerator±  3%± 3%
armature± 5%± 5%
Excitationinput230 Vac ±10%230 Vac ±10%
output190Vdc190Vdc
Potentiometer2.5k ohm 1W2.5k ohm 1W
Adjustment RangesOutput Voltag145 .. 210 Vdc145 .. 210 Vdc
Compensation0 .. 4 ohm0 .. 4 ohm
Ramps0 .. 4 sec.0 .. 4 sec.
Limitation4,5 .. 6,5 A9 .. 12 A
Nominal Current5 A8 A
Peak Current6,5 A10 A
Fast Fuses6.3 A (5x20 mm)16 A (6.3 x 32 mm)
Operating Temperature0 .. 45 °C0 .. 45°C
Storage Temperature-20 .. +70°C-20 .. +70°C

BLDC

Scarica pdf

FUNCTIONVALUE
Maximum output voltageSupply voltage * 0.9
PWM frequency20KHz
Operating temperature0/+45°C
Storage temperature-10/+70°C
Thermal drift of analog circuits+/- 0.5V/°C
Analog inputs (+/-VEL)+/-10Vdc max, 20Kohm impedance each
Current monitor (CURR)+/-8Vdc = Peak current
Speed monitor (TP1)+/-8Vdc = Maximum speed
Output power supply (+V)+5Vdc max 130 mA
Auxiliary supplies (+/-9.8V)+/-9.8Vdc max. 4mA
Maximum encoder frequency300KHz Logic levels 2.8/+24V min/max
FAULT outputNPN max. 50mA
Enable signal (START)+9V/+30Vdc (min/max)
Bandwidth (current stage)2KHz
Bandwidth (speed loop)150Hz
Minimum motor armature inductance400uH
Weight0.35 kg
AltitudeUp to 1000m without restrictions
From 1000 to 2000m derating of 1.5%
Pollution degree2nd best (Standards EN60204 and EN50178)