EWDB

集成伺服驱动器

内置控制单元,这款同步伺服电机结合了紧凑的尺寸与分散驱动的概念,节省空间,优化机身布线。

Features

  • 电源范围从 24 到 60 Vdc
  • 集成单圈绝对编码器
  • 可用现场总线:CANopen DS402 – EtherCAT – ProfinetIO – EthernetIP
  • 4 个数字输入
  • 防护等级:IP65
  • 使用 Drivewatcher 进行配置
  • 后部有 4 个 IP65 工业金属连接器,防水,顶部 2 个用于现场总线通信,底部 2 个用于 I/O 和电源连接
  • 基于 60 mm 法兰电机,静止扭矩为 0.7 Nm、1.3 Nm 或 1.6 Nm,带或不带集成减速器

EWDB

Scarica pdf

EWDB121xxxEWDB122xxxEWDB123xxx
Drive section
Input Power Main Circuit From 24Vdc to 60Vdc – All data referred to 48Vdc +/-10%From 24Vdc to 60Vdc – All data referred to 48Vdc +/-10%From 24Vdc to 60Vdc – All data referred to 48Vdc +/-10%
Input Power Control Circuit24Vdc24Vdc24Vdc
Output Current10A10A10A
Peak Current (for 2 s) 20A20A20A
Control MethodPWM Sinusoidal wave drivePWM Sinusoidal wave drivePWM Sinusoidal wave drive
Analogue Inputnonono
Digital Input4 x +24 Vdc (Drive Enable – Limit Switch 1, 2 – Homing) 4 x +24 Vdc (Drive Enable – Limit Switch 1, 2 – Homing)4 x +24 Vdc (Drive Enable – Limit Switch 1, 2 – Homing)
Digital Outputnonono
Status LedFor status and alarms warningFor status and alarms warningFor status and alarms warning
CommunicationRS-485 (for configuration) – CANopen – EtherCAT - ProfinetIORS-485 (for configuration) – CANopen – EtherCAT - ProfinetIORS-485 (for configuration) – CANopen – EtherCAT - ProfinetIO
ProtectionI²T, thermalI²T, thermalI²T, thermal
Brake managementIntegrated; immediate stop or in ramp mode (optional)Integrated; immediate stop or in ramp mode (optional)Integrated; immediate stop or in ramp mode (optional)
Configuration driveWith Drivewatcher SoftwareWith Drivewatcher SoftwareWith Drivewatcher Software
Power Loss 7,2W @ stand-by – 24,3W @ I nominal7,2W @ stand-by – 24,3W @ I nominal7,2W @ stand-by – 24,3W @ I nominal
Motor Section
Stall Torque0,7 Nm1,3 Nm1,6 Nm
Max Torque2,4 Nm2,5 Nm3,5 Nm
Stall Current7A10A14A
Peak Current20A20A20A
Max Mechanical Speed3500 rpm3000 rpm3000 rpm
Voltage Constant Ke8 V/krpm8 V/krpm8,5 V/krpm
Torque Constant KT0,13 Nm/A0,132 Nm/A0,141 Nm/A
Rotor Inertia0,13 kgcm²0,23 kgcm²0,33 kgcm²
FlangeInterax 63 mm x Centering 40 mm
Weight1,8 kg2,3 kg2,9 kg
Connection TypeConnectors M17 for power and M12 for signal / fieldbusConnectors M17 for power and M12 for signal / fieldbusConnectors M17 for power and M12 for signal / fieldbus
Environmental Conditions
Working Temperature0°C to 40°C0°C to 40°C0°C to 40°C
Stocking Temperature-20°C .. + 65°C-20°C .. + 65°C-20°C .. + 65°C
AltitudeLower than 1000mLower than 1000mLower than 1000m
Humidity5 to 85%RH or less both Operating and Storage5 to 85%RH or less both Operating and Storage5 to 85%RH or less both Operating and Storage
Vibration9,8m/s² or less, 10 - 60Hz (Do not use continuously at resonance frequency9,8m/s² or less, 10 - 60Hz (Do not use continuously at resonance frequency9,8m/s² or less, 10 - 60Hz (Do not use continuously at resonance frequency
Protection DegreeIP65IP65IP65
Standard
2014/35/UE - 2014/35/EUDirettiva Bassa Tensione / Low Voltage Directive / Directive Basse Tension /
Niederspannungsrichtlinie / Directiva de Baja Tensión:
Direttiva Bassa Tensione / Low Voltage Directive / Directive Basse Tension /
Niederspannungsrichtlinie / Directiva de Baja Tensión:
Direttiva Bassa Tensione / Low Voltage Directive / Directive Basse Tension /
Niederspannungsrichtlinie / Directiva de Baja Tensión:
2014/30/UE - 2014/30/EUDirettiva EMC / EMC directive / Directive CEM / EMV-Richtlinie / Directiva EMC:Direttiva EMC / EMC directive / Directive CEM / EMV-Richtlinie / Directiva EMC:Direttiva EMC / EMC directive / Directive CEM / EMV-Richtlinie / Directiva EMC:
2011/65/UE – 2011/65/EUDirettiva RoHS / RoHS Directive / Directive RoHS / RoHS-Richtlinie / Directiva RoHS:Direttiva RoHS / RoHS Directive / Directive RoHS / RoHS-Richtlinie / Directiva RoHS:Direttiva RoHS / RoHS Directive / Directive RoHS / RoHS-Richtlinie / Directiva RoHS:
CEI EN 61800-3 2005 + A1:2013EMC requirements and specific test methodsEMC requirements and specific test methodsEMC requirements and specific test methods
CEI EN 61800-2 1999-2009General requirements. Rating specificationsGeneral requirements. Rating specificationsGeneral requirements. Rating specifications
CEI EN 61800-5-1 2009Safety requirements. Electrical, thermal and energySafety requirements. Electrical, thermal and energySafety requirements. Electrical, thermal and energy