Servo Drive DC
SDRC
230Vac 单向模拟转换器。该转换器设计用于驱动从0.22到1.7 kW的直流电机,适用于各种应用;其特点是体积小和高可靠性。
BLDC
用于直流伺服电机的四象限驱动器。该驱动器设计用于以模拟模式驱动从0.4到1.3 kW的电机,电压最高可达130Vdc。
230Vac 单向模拟转换器。该转换器设计用于驱动从0.22到1.7 kW的直流电机,适用于各种应用;其特点是体积小和高可靠性。
用于直流伺服电机的四象限驱动器。该驱动器设计用于以模拟模式驱动从0.4到1.3 kW的电机,电压最高可达130Vdc。
Characteristics | 9XSDRC05IG | 9XSDRC10IG | |||
---|---|---|---|---|---|
Power Supply | 230 Vac ±10% | 230 Vac ±10% | |||
Output Voltage | 170Vdc | 170Vdc | |||
Regulation Ratio | with tachogenerator | 1:30 | 1:30 | ||
armature | 1:10 | 1:10 | |||
Speed Error | with tachogenerator | ± 3% | ± 3% | ||
armature | ± 5% | ± 5% | |||
Excitation | input | 230 Vac ±10% | 230 Vac ±10% | ||
output | 190Vdc | 190Vdc | |||
Potentiometer | 2.5k ohm 1W | 2.5k ohm 1W | |||
Adjustment Ranges | Output Voltag | 145 .. 210 Vdc | 145 .. 210 Vdc | ||
Compensation | 0 .. 4 ohm | 0 .. 4 ohm | |||
Ramps | 0 .. 4 sec. | 0 .. 4 sec. | |||
Limitation | 4,5 .. 6,5 A | 9 .. 12 A | |||
Nominal Current | 5 A | 8 A | |||
Peak Current | 6,5 A | 10 A | |||
Fast Fuses | 6.3 A (5x20 mm) | 16 A (6.3 x 32 mm) | |||
Operating Temperature | 0 .. 45 °C | 0 .. 45°C | |||
Storage Temperature | -20 .. +70°C | -20 .. +70°C |
FUNCTION | VALUE |
---|---|
Maximum output voltage | Supply voltage * 0.9 |
PWM frequency | 20KHz |
Operating temperature | 0/+45°C |
Storage temperature | -10/+70°C |
Thermal drift of analog circuits | +/- 0.5V/°C |
Analog inputs (+/-VEL) | +/-10Vdc max, 20Kohm impedance each |
Current monitor (CURR) | +/-8Vdc = Peak current |
Speed monitor (TP1) | +/-8Vdc = Maximum speed |
Output power supply (+V) | +5Vdc max 130 mA |
Auxiliary supplies (+/-9.8V) | +/-9.8Vdc max. 4mA |
Maximum encoder frequency | 300KHz Logic levels 2.8/+24V min/max |
FAULT output | NPN max. 50mA |
Enable signal (START) | +9V/+30Vdc (min/max) |
Bandwidth (current stage) | 2KHz |
Bandwidth (speed loop) | 150Hz |
Minimum motor armature inductance | 400uH |
Weight | 0.35 kg |
Altitude | Up to 1000m without restrictions |
From 1000 to 2000m derating of 1.5% | |
Pollution degree | 2nd best (Standards EN60204 and EN50178) |